12-03-2018 09:56 AM
I now have:
5 Mini Outlets
4 of the outlets are working fine, the fifth will not configure, I have tried the following:
Plug it in directly next to the wireless router
I wait until it flashes white and amber
Connect to it via the wireless SSID
Name it (being that I have saved the wireless information nothing else is needed)
The application now tries to connet to it, then to cellular, then to the lacal wirless network
The application then tells me remote access is enabled (which it didn't notify me with the others because it was already enabled)
The application now shows all the products but the one I just configured
The Mini Outlet I was trying to configure it still flashing white and amber
I can still see the Mini Outlets SSID
I have factory reset the outlet via this page: (scenarion 1) https://www.belkin.com/us/support-article?articleNum=208582&_ga=2.96954972.2122032089.1543858208-176...
Got the exact same results. The others are all working (well there is a problem with a switch) and they are even in rules already, this one refuses to work (like my teenage son).
Do I return this one or is there a special way to get this one working?
As for one of the switches, it doesn't seem to like the application though it is working within the rule... Also on the app page it shows a long gray rectangle in the left lower side of the switch line.
Solved! Go to Solution.
12-04-2018 09:14 AM
You seem to have tried most of the recommended troubleshooting steps. At this point in time, allow us to hand you over to our Product Engineers to be assisted further. Please send us an email at WemoCares@belkin.com along with these information:
We look forward to hear from you the soonest.