08-01-2017 06:52 PM - edited 08-01-2017 06:57 PM
Just installed a wemo dimmer on a circuit with 6 dimmable LED recessed lights, which previously worked fine with a normal dimmer. They flicker horribly at anything below 50% (per wemo app) which is observably about 90% brightness, so not worth a dimmer.
If I swap out any one bulb for a tradational incandescent, the dimming works fine for the incandescent and the 5 remaining LEDs. If I have one fixture empty and 5 LEDs the flicker returns.
any ideas? Leaving one incandescent looks pretty bad in my setup, and I would prefer all LED for energy reasons.
08-04-2017 08:30 PM
Hi, G41184B. Let's get you over to our Escalation Engineers to have you properly assisted. Email us your complete name, phone number, location (country/state), and the link to this post for our reference at WemoCares@belkin.com.
09-04-2017 07:54 PM
09-05-2017 03:35 AM
Hello, Mlipman. May we know the make and model of the bulbs that you're having issues with? We believe that this may have something to do with the bulbs and not the Wemo Dimmer that's causing this behavior. You may try to use different bulb (different make and model) so we can get this issue properly isolated. Take note that the Wemo Dimmer is compatible with Compact Fluorescent Lamp (CFL) / incandescent / LED bulbs. If it does the same thing, email us your full name, phone number, location (state/country), community username and the link to this community post for our reference at WemoCares@belkin.com so we can have our Escalation Engineers contact you and conduct a further diagnosis.
Feel free to update this thread with the outcome. We'll be waiting.
09-05-2017 04:17 PM
Our Escalation Engineers is willing to sort things out with you further. Email us the details as mentioned by Dennis_B at WemoCares@belkin.com so we can endose you to the team.