WEMO Hardware

Showing results for 
Search instead for 
Do you mean 
Reply
Highlighted
Posts: 3
Registered: ‎12-25-2018
Accepted Solution

how do I set consecutive rules for one device without interruptions

 

I have a WEMO dimmer-I want to set one rule for it to come on between Sunset and 1:00am at full brightness, then another rule for it to provide 50% brightness until sunrise.   I know rules cannot over-lap-does that mean the second rule cannot start until 1:01 am which means there will be one minute of darkness between the end of rule #1 (1:00am) and the beginning of rule#2 (1:01am)

 

I tried first to have rule# 2 start at the same time as rule #1 eded (i.e. 1:00am) but it just remained on at 100% brightness.for thw whole night.

Aubrie

Moderator
Posts: 120
Registered: ‎12-12-2017

Re: how do I set consecutive rules for one device without interruptions

You're right, aub4000. Wemo rules should not overlap. Otherwise, the Wemo Dimmer's behavior may be unpredictable. In this case, setting the start time of the second rule at 1:01 a.m. is the best option.

 

 

Reil – 22071
Wemo Technical Support