Can the Cost & Consumption Calculations be disabled and/or deleted from Wemo Insite Switch.
Use the switches for Special Needs Clients and when they hit the calculation function ( by accident ) they get confused and "MAD"
Original Switches without calculations work just fine but how long before they are not available ??
Here are a couple things to try that might suffice as a workaround.
In the Wemo app:
1. select edit (top right)
2. touch down arrow that usually pulls up the stats page
3. under Cost per kWH try setting it to 0
4. touch reset
5. clear usage data
You also might try setting the Threshold to a wattage greater than the device attached to it. That potentially would prevent the Insight from recording data.
Please let me know if either of these suggestions work.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.