WEMO Ideas

Showing results for 
Search instead for 
Do you mean 
0 Kudos

WEMO DEVICES DO NOT ROAM AS WIRELESS DEVICES SHOULD

by cfogri1 ‎09-11-2018 10:57 AM - edited ‎09-11-2018 11:23 AM

I have 2 access points with the same SSID, and the WEMO devices I have (smart switch F7C027) stays connected to access point #1, which they were set up with, even though access point #2 has a much stronger signal. Access point #2 is where the devices are located and used. The devices will always connect to the access point #1 the weaker signal and never connect to access point #2. Note: Even after a Reboot. WEMO devices should be allowed to roam to the stronger SSID access points. Weaker SSID connections lowers the throughput data rate and the devices become buggy, the Roaming functions should be turned on in the firmware. 

Comments
by nathannile
on ‎09-11-2018 01:47 PM

Wemo devices always under tracking so it is best to use. As devices are allowed to roam to the stronger SSID access points. data recovery Dubai help you to turn on the roaming function which should be on in the case of firmware.