WEMO Ideas

Showing results for 
Search instead for 
Do you mean 
0 Kudos

need help wiring a 3 way switch

by cuseman03 on ‎01-08-2018 02:16 PM

Hi,

 

hoping someone can help me here.  so ive installed 4 dimmers fine but oddly enough im having a hard time with a switch.  i guess i have a 3 way switch?  I have lights that are controlled by 2 switches.  The wiring is shown below, i have 1 of each type.  i have power to the device but other than the lights flicking on for a half a second i cannot get them to connect and right now I'm chalking it up to the 3 way issue.  should I try to install the switch on the other end of the 3 way?  

 

IMG_0370.JPG

 

the connection to me seems easy b/c off the bat the neutrail and ground wires are spoken for.  that would only leave live and load and ive tried each with both wire options and still nothing.

 

Comments
by WEMO Maker Inventor
on ‎01-08-2018 07:49 PM

Belkin doesn't support using the wemo switch in a 3 way application.  You can probably use it there but you'll need to re-wire the other location to send power to the switch, you'll find more info here: https://sites.google.com/site/mppsuite/faq/wemomanager/wemofaq/wemo3ways